Table of Contents
Introduction .........................................................................................pg. 2
Where C came from, what is it like, what other resources might you look at.
Section 1 Basic Types and Operators ..........................................pg. 3
Integer types, floating point types, assignment operator, comparison operators,
arithmetic operators, truncation, promotion.
Section 2 Control Structures ........................................................pg. 11
If statement, conditional operator, switch, while, for, do-while, break, continue.
Section 3 Complex Data Types .....................................................pg. 15
Structs, arrays, pointers, ampersand operator (&), NULL, C strings, typedef.
Section 4 Functions........................................................................pg. 24
Functions, void, value and reference parameters, const.
Section 5 Odds and Ends ..............................................................pg. 29
Main(), the .h/.c file convention, pre-processor, assert.
Section 6 Advanced Arrays and Pointers ....................................pg. 33
How arrays and pointers interact. The [ ] and + operators with pointers, base
address/offset arithmetic, heap memory management, heap arrays.
Section 7 Operators and Standard Library Reference ..............pg. 41
A summary reference of the most common operators and library functions.
The C Language
C is a professional programmer's language. It was designed to get in one's way as little as
possible. Kernighan and Ritchie wrote the original language definition in their book, The
C Programming Language (below), as part of their research at AT&T. Unix and C++
emerged from the same labs. For several years I used AT&T as my long distance carrier
in appreciation of all that CS research, but hearing "thank you for using AT&T" for the
millionth time has used up that good will.
2
Some languages are forgiving. The programmer needs only a basic sense of how things
work. Errors in the code are flagged by the compile-time or run-time system, and the
programmer can muddle through and eventually fix things up to work correctly. The C
language is not like that.
The C programming model is that the programmer knows exactly what they want to do
and how to use the language constructs to achieve that goal. The language lets the expert
programmer express what they want in the minimum time by staying out of their way.
C is "simple" in that the number of components in the language is small-- If two language
features accomplish more-or-less the same thing, C will include only one. C's syntax is
terse and the language does not restrict what is "allowed" -- the programmer can pretty
much do whatever they want.
C's type system and error checks exist only at compile-time. The compiled code runs in a
stripped down run-time model with no safety checks for bad type casts, bad array indices,
or bad pointers. There is no garbage collector to manage memory. Instead the
programmer mangages heap memory manually. All this makes C fast but fragile.
Analysis -- Where C Fits
Because of the above features, C is hard for beginners. A feature can work fine in one
context, but crash in another. The programmer needs to understand how the features work
and use them correctly. On the other hand, the number of features is pretty small.
Like most programmers, I have had some moments of real loathing for the C language. It
can be irritatingly obedient -- you type something incorrectly, and it has a way of
compiling fine and just doing something you don't expect at run-time. However, as I have
become a more experienced C programmer, I have grown to appreciate C's straight-to-the
point style. I have learned not to fall into its little traps, and I appreciate its simplicity.
Perhaps the best advice is just to be careful. Don't type things in you don't understand.
Debugging takes too much time. Have a mental picture (or a real drawing) of how your C
code is using memory. That's good advice in any language, but in C it's critical.
Perl and Java are more "portable" than C (you can run them on different computers
without a recompile). Java and C++ are more structured than C. Structure is useful for
large projects. C works best for small projects where performance is important and the
progammers have the time and skill to make it work in C. In any case, C is a very popular
and influential language. This is mainly because of C's clean (if minimal) style, it's lack
of annoying or regrettable constructs, and the relative ease of writing a C compiler.
Other Resources
• The C Programming Language, 2nd ed., by Kernighan and Ritchie. The thin book
which for years was the bible for all C programmers. Written by the original
designers of the language. The explanations are pretty short, so this book is better as a
reference than for beginners.
• http://cslibrary.stanford.edu/102/ Pointers and Memory -- Much more detail
about local memory, pointers, reference parameters, and heap memory than in this
article, and memory is really the hardest part of C and C++.
• http://cslibrary.stanford.edu//103/ Linked List Basics -- Once you understand the
basics of pointers and C, these problems are a good way to get more practice.
3
Section 1
Basic Types and Operators
C provides a standard, minimal set of basic data types. Sometimes these are called
"primitive" types. More complex data structures can be built up from these basic types.
Integer Types
The "integral" types in C form a family of integer types. They all behave like integers and
can be mixed together and used in similar ways. The differences are due to the different
number of bits ("widths") used to implement each type -- the wider types can store a
greater ranges of values.
char ASCII character -- at least 8 bits. Pronounced "car". As a practical matter
char is basically always a byte which is 8 bits which is enough to store a single
ASCII character. 8 bits provides a signed range of -128..127 or an unsigned range is
0..255. char is also required to be the "smallest addressable unit" for the machine --
each byte in memory has its own address.
short Small integer -- at least 16 bits which provides a signed range of
-32768..32767. Typical size is 16 bits. Not used so much.
int Default integer -- at least 16 bits, with 32 bits being typical. Defined to be
the "most comfortable" size for the computer. If you do not really care about the
range for an integer variable, declare it int since that is likely to be an appropriate
size (16 or 32 bit) which works well for that machine.
long Large integer -- at least 32 bits. Typical size is 32 bits which gives a signed
range of about -2 billion ..+2 billion. Some compilers support "long long" for 64 bit
ints.
The integer types can be preceded by the qualifier unsigned which disallows
representing negative numbers, but doubles the largest positive number representable. For
example, a 16 bit implementation of short can store numbers in the range
-32768..32767, while unsigned short can store 0..65535. You can think of pointers
as being a form of unsigned long on a machine with 4 byte pointers. In my opinion,
it's best to avoid using unsigned unless you really need to. It tends to cause more
misunderstandings and problems than it is worth.
Extra: Portability Problems
Instead of defining the exact sizes of the integer types, C defines lower bounds. This
makes it easier to implement C compilers on a wide range of hardware. Unfortunately it
occasionally leads to bugs where a program runs differently on a 16-bit-int machine than
it runs on a 32-bit-int machine. In particular, if you are designing a function that will be
implemented on several different machines, it is a good idea to use typedefs to set up
types like Int32 for 32 bit int and Int16 for 16 bit int. That way you can prototype a
function Foo(Int32) and be confident that the typedefs for each machine will be set so
that the function really takes exactly a 32 bit int. That way the code will behave the same
on all the different machines.
char Constants
A char constant is written with single quotes (') like 'A' or 'z'. The char constant 'A' is
really just a synonym for the ordinary integer value 65 which is the ASCII value for
4
uppercase 'A'. There are special case char constants, such as '\t' for tab, for characters
which are not convenient to type on a keyboard.
'A' uppercase 'A' character
'\n' newline character
'\t' tab character
'\0' the "null" character -- integer value 0 (different from the char digit '0')
'\012' the character with value 12 in octal, which is decimal 10
int Constants
Numbers in the source code such as 234 default to type int. They may be followed by
an 'L' (upper or lower case) to designate that the constant should be a long such as 42L.
An integer constant can be written with a leading 0x to indicate that it is expressed in
hexadecimal -- 0x10 is way of expressing the number 16. Similarly, a constant may be
written in octal by preceding it with "0" -- 012 is a way of expressing the number 10.
Type Combination and Promotion
The integral types may be mixed together in arithmetic expressions since they are all
basically just integers with variation in their width. For example, char and int can be
combined in arithmetic expressions such as ('b' + 5). How does the compiler deal
with the different widths present in such an expression? In such a case, the compiler
"promotes" the smaller type (char) to be the same size as the larger type (int) before
combining the values. Promotions are determined at compile time based purely on the
types of the values in the expressions. Promotions do not lose information -- they always
convert from a type to compatible, larger type to avoid losing information.
Pitfall -- int Overflow
I once had a piece of code which tried to compute the number of bytes in a buffer with
the expression (k * 1024) where k was an int representing the number of kilobytes
I wanted. Unfortunately this was on a machine where int happened to be 16 bits. Since
k and 1024 were both int, there was no promotion. For values of k >= 32, the product
was too big to fit in the 16 bit int resulting in an overflow. The compiler can do
whatever it wants in overflow situations -- typically the high order bits just vanish. One
way to fix the code was to rewrite it as (k * 1024L) -- the long constant forced the
promotion of the int. This was not a fun bug to track down -- the expression sure looked
reasonable in the source code. Only stepping past the key line in the debugger showed the
overflow problem. "Professional Programmer's Language." This example also
demonstrates the way that C only promotes based on the types in an expression. The
compiler does not consider the values 32 or 1024 to realize that the operation will
overflow (in general, the values don't exist until run time anyway). The compiler just
looks at the compile time types, int and int in this case, and thinks everything is fine.
Floating point Types
float Single precision floating point number typical size: 32 bits
double Double precision floating point number typical size: 64 bits
long double Possibly even bigger floating point number (somewhat obscure)
Constants in the source code such as 3.14 default to type double unless the are suffixed
with an 'f' (float) or 'l' (long double). Single precision equates to about 6 digits of
5
precision and double is about 15 digits of precision. Most C programs use double for
their computations. The main reason to use float is to save memory if many numbers
need to be stored. The main thing to remember about floating point numbers is that they
are inexact. For example, what is the value of the following double expression?
(1.0/3.0 + 1.0/3.0 + 1.0/3.0) // is this equal to 1.0 exactly?
The sum may or may not be 1.0 exactly, and it may vary from one type of machine to
another. For this reason, you should never compare floating numbers to eachother for
equality (==) -- use inequality (<) comparisons instead. Realize that a correct C program
run on different computers may produce slightly different outputs in the rightmost digits
of its floating point computations.
Comments
Comments in C are enclosed by slash/star pairs: /* .. comments .. */ which
may cross multiple lines. C++ introduced a form of comment started by two slashes and
extending to the end of the line: // comment until the line end
The // comment form is so handy that many C compilers now also support it, although it
is not technically part of the C language.
Along with well-chosen function names, comments are an important part of well written
code. Comments should not just repeat what the code says. Comments should describe
what the code accomplishes which is much more interesting than a translation of what
each statement does. Comments should also narrate what is tricky or non-obvious about a
section of code.
Variables
As in most languages, a variable declaration reserves and names an area in memory at run
time to hold a value of particular type. Syntactically, C puts the type first followed by the
name of the variable. The following declares an int variable named "num" and the 2nd
line stores the value 42 into num.
int num;
num = 42;
num 42
A variable corresponds to an area of memory which can store a value of the given type.
Making a drawing is an excellent way to think about the variables in a program. Draw
each variable as box with the current value inside the box. This may seem like a
"beginner" technique, but when I'm buried in some horribly complex programming
problem, I invariably resort to making a drawing to help think the problem through.
Variables, such as num, do not have their memory cleared or set in any way when they
are allocated at run time. Variables start with random values, and it is up to the program
to set them to something sensible before depending on their values.
Names in C are case sensitive so "x" and "X" refer to different variables. Names can
contain digits and underscores (_), but may not begin with a digit. Multiple variables can
be declared after the type by separating them with commas. C is a classical "compile
time" language -- the names of the variables, their types, and their implementations are all
flushed out by the compiler at compile time (as opposed to figuring such details out at run
time like an interpreter).
6
float x, y, z, X;
Assignment Operator =
The assignment operator is the single equals sign (=).
i = 6;
i = i + 1;
The assignment operator copies the value from its right hand side to the variable on its
left hand side. The assignment also acts as an expression which returns the newly
assigned value. Some programmers will use that feature to write things like the following.
y = (x = 2 * x); // double x, and also put x's new value in y
Truncation
The opposite of promotion, truncation moves a value from a type to a smaller type. In
that case, the compiler just drops the extra bits. It may or may not generate a compile
time warning of the loss of information. Assigning from an integer to a smaller integer
(e.g.. long to int, or int to char) drops the most significant bits. Assigning from a
floating point type to an integer drops the fractional part of the number.
char ch;
int i;
i = 321;
ch = i; // truncation of an int value to fit in a char
// ch is now 65
The assignment will drop the upper bits of the int 321. The lower 8 bits of the number
321 represents the number 65 (321 - 256). So the value of ch will be (char)65 which
happens to be 'A'.
The assignment of a floating point type to an integer type will drop the fractional part of
the number. The following code will set i to the value 3. This happens when assigning a
floating point number to an integer or passing a floating point number to a function which
takes an integer.
double pi;
int i;
pi = 3.14159;
i = pi; // truncation of a double to fit in an int
// i is now 3
Pitfall -- int vs. float Arithmetic
Here's an example of the sort of code where int vs. float arithmetic can cause
problems. Suppose the following code is supposed to scale a homework score in the
range 0..20 to be in the range 0..100.
{
int score;
...// suppose score gets set in the range 0..20 somehow
7
score = (score / 20) * 100; // NO -- score/20 truncates to 0
...
Unfortunately, score will almost always be set to 0 for this code because the integer
division in the expression (score/20) will be 0 for every value of score less than 20.
The fix is to force the quotient to be computed as a floating point number...
score = ((double)score / 20) * 100; // OK -- floating point division from cast
score = (score / 20.0) * 100; // OK -- floating point division from 20.0
score = (int)(score / 20.0) * 100; // NO -- the (int) truncates the floating
// quotient back to 0
No Boolean -- Use int
C does not have a distinct boolean type-- int is used instead. The language treats integer
0 as false and all non-zero values as true. So the statement...
i = 0;
while (i - 10) {
...
will execute until the variable i takes on the value 10 at which time the expression (i -
10) will become false (i.e. 0). (we'll see the while() statement a bit later)
Mathematical Operators
C includes the usual binary and unary arithmetic operators. See the appendix for the table
of precedence. Personally, I just use parenthesis liberally to avoid any bugs due to a
misunderstanding of precedence. The operators are sensitive to the type of the operands.
So division (/) with two integer arguments will do integer division. If either argument is
a float, it does floating point division. So (6/4) evaluates to 1 while (6/4.0)
evaluates to 1.5 -- the 6 is promoted to 6.0 before the division.
+ Addition
- Subtraction
/ Division
* Multiplication
% Remainder (mod)
Unary Increment Operators: ++ --
The unary ++ and -- operators increment or decrement the value in a variable. There are
"pre" and "post" variants for both operators which do slightly different things (explained
below)
var++ increment "post" variant
++var increment "pre" variant
8
var-- decrement "post" variant
--var decrement "pre" variant
int i = 42;
i++; // increment on i
// i is now 43
i--; // decrement on i
// i is now 42
Pre and Post Variations
The Pre/Post variation has to do with nesting a variable with the increment or decrement
operator inside an expression -- should the entire expression represent the value of the
variable before or after the change? I never use the operators in this way (see below), but
an example looks like...
int i = 42;
int j;
j = (i++ + 10);
// i is now 43
// j is now 52 (NOT 53)
j = (++i + 10)
// i is now 44
// j is now 54
C Programming Cleverness and Ego Issues
Relying on the difference between the pre and post variations of these operators is a
classic area of C programmer ego showmanship. The syntax is a little tricky. It makes the
code a little shorter. These qualities drive some C programmers to show off how clever
they are. C invites this sort of thing since the language has many areas (this is just one
example) where the programmer can get a complex effect using a code which is short and
dense.
If I want j to depend on i's value before the increment, I write...
j = (i + 10);
i++;
Or if I want to j to use the value after the increment, I write...
i++;
j = (i + 10);
Now then, isn't that nicer? (editorial) Build programs that do something cool rather than
programs which flex the language's syntax. Syntax -- who cares?
Relational Operators
These operate on integer or floating point values and return a 0 or 1 boolean value.
== Equal
9
!= Not Equal
> Greater Than
< Less Than
>= Greater or Equal
<= Less or Equal
To see if x equals three, write something like:
if (x == 3) ...
Pitfall = ==
An absolutely classic pitfall is to write assignment (=) when you mean comparison (==).
This would not be such a problem, except the incorrect assignment version compiles fine
because the compiler assumes you mean to use the value returned by the assignment. This
is rarely what you want
if (x = 3) ...
This does not test if x is 3. This sets x to the value 3, and then returns the 3 to the if for
testing. 3 is not 0, so it counts as "true" every time. This is probably the single most
common error made by beginning C programmers. The problem is that the compiler is no
help -- it thinks both forms are fine, so the only defense is extreme vigilance when
coding. Or write "= ¹ ==" in big letters on the back of your hand before coding. This
mistake is an absolute classic and it's a bear to debug. Watch Out! And need I say:
"Professional Programmer's Language."
Logical Operators
The value 0 is false, anything else is true. The operators evaluate left to right and stop as
soon as the truth or falsity of the expression can be deduced. (Such operators are called
"short circuiting") In ANSI C, these are furthermore guaranteed to use 1 to represent true,
and not just some random non-zero bit pattern. However, there are many C programs out
there which use values other than 1 for true (non-zero pointers for example), so when
programming, do not assume that a true boolean is necessarily 1 exactly.
! Boolean not (unary)
&& Boolean and
|| Boolean or
Bitwise Operators
C includes operators to manipulate memory at the bit level. This is useful for writing lowlevel
hardware or operating system code where the ordinary abstractions of numbers,
characters, pointers, etc... are insufficient -- an increasingly rare need. Bit manipulation
code tends to be less "portable". Code is "portable" if with no programmer intervention it
compiles and runs correctly on different types of computers. The bitwise operations are
10
typically used with unsigned types. In particular, the shift operations are guaranteed to
shift 0 bits into the newly vacated positions when used on unsigned values.
~ Bitwise Negation (unary) – flip 0 to 1 and 1 to 0 throughout
& Bitwise And
| Bitwise Or
^ Bitwise Exclusive Or
>> Right Shift by right hand side (RHS) (divide by power of 2)
<< Left Shift by RHS (multiply by power of 2)
Do not confuse the Bitwise operators with the logical operators. The bitwise connectives
are one character wide (&, |) while the boolean connectives are two characters wide (&&,
||). The bitwise operators have higher precedence than the boolean operators. The
compiler will never help you out with a type error if you use & when you meant &&. As
far as the type checker is concerned, they are identical-- they both take and produce
integers since there is no distinct boolean type.
Other Assignment Operators
In addition to the plain = operator, C includes many shorthand operators which represents
variations on the basic =. For example "+=" adds the right hand side to the left hand side.
x = x + 10; can be reduced to x += 10;. This is most useful if x is a long
expression such as the following, and in some cases it may run a little faster.
person->relatives.mom.numChildren += 2; // increase children by 2
Here's the list of assignment shorthand operators...
+=, -= Increment or decrement by RHS
*=, /= Multiply or divide by RHS
%= Mod by RHS
>>= Bitwise right shift by RHS (divide by power of 2)
<<= Bitwise left shift RHS (multiply by power of 2)
&=, |=, ^= Bitwise and, or, xor by RHS
11
Section 2
Control Structures
Curly Braces {}
C uses curly braces ({}) to group multiple statements together. The statements execute in
order. Some languages let you declare variables on any line (C++). Other languages insist
that variables are declared only at the beginning of functions (Pascal). C takes the middle
road -- variables may be declared within the body of a function, but they must follow a
'{'. More modern languages like Java and C++ allow you to declare variables on any line,
which is handy.
If Statement
Both an if and an if-else are available in C. The
expression. The parentheses around the expression are required, even if it is just a single
variable.
if (
if (
}
if (
}
else {
}
Conditional Expression -or- The Ternary Operator
The conditional expression can be used as a shorthand for some if-else statements. The
general syntax of the conditional operator is:
This is an expression, not a statement, so it represents a value. The operator works by
evaluating expression1. If it is true (non-zero), it evaluates and returns expression2 .
Otherwise, it evaluates and returns expression3.
The classic example of the ternary operator is to return the smaller of two variables.
Every once in a while, the following form is just what you needed. Instead of...
if (x < y) {
min = x;
}
else {
min = y;
}
12
You just say...
min = (x < y) ? x : y;
Switch Statement
The switch statement is a sort of specialized form of if used to efficiently separate
different blocks of code based on the value of an integer. The switch expression is
evaluated, and then the flow of control jumps to the matching const-expression case. The
case expressions are typically int or char constants. The switch statement is probably
the single most syntactically awkward and error-prone features of the C language.
switch (
case
break;
case
break;
case
case
break;
default: // optional
}
Each constant needs its own case keyword and a trailing colon (:). Once execution has
jumped to a particular case, the program will keep running through all the cases from that
point down -- this so called "fall through" operation is used in the above example so that
expression-3 and expression-4 run the same statements. The explicit break statements
are necessary to exit the switch. Omitting the break statements is a common error -- it
compiles, but leads to inadvertent fall-through behavior.
Why does the switch statement fall-through behavior work the way it does? The best
explanation I can think of is that originally C was developed for an audience of assembly
language programmers. The assembly language programmers were used to the idea of a
jump table with fall-through behavior, so that's the way C does it (it's also relatively easy
to implement it this way.) Unfortunately, the audience for C is now quite different, and
the fall-through behavior is widely regarded as a terrible part of the language.
While Loop
The while loop evaluates the test expression before every loop, so it can execute zero
times if the condition is initially false. It requires the parenthesis like the if.
while (
}
13
Do-While Loop
Like a while, but with the test condition at the bottom of the loop. The loop body will
always execute at least once. The do-while is an unpopular area of the language, most
everyone tries to use the straight while if at all possible.
do {
} while (
For Loop
The for loop in C is the most general looping construct. The loop header contains three
parts: an initialization, a continuation condition, and an action.
for (
}
The initialization is executed once before the body of the loop is entered. The loop
continues to run as long as the continuation condition remains true (like a while). After
every execution of the loop, the action is executed. The following example executes 10
times by counting 0..9. Many loops look very much like the following...
for (i = 0; i < 10; i++) {
}
C programs often have series of the form 0..(some_number-1). It's idiomatic in C for the
above type loop to start at 0 and use < in the test so the series runs up to but not equal to
the upper bound. In other languages you might start at 1 and use <= in the test.
Each of the three parts of the for loop can be made up of multiple expressions separated
by commas. Expressions separated by commas are executed in order, left to right, and
represent the value of the last expression. (See the string-reverse example below for a
demonstration of a complex for loop.)
Break
The break statement will move control outside a loop or switch statement. Stylistically
speaking, break has the potential to be a bit vulgar. It's preferable to use a straight
while with a single test at the top if possible. Sometimes you are forced to use a break
because the test can occur only somewhere in the midst of the statements in the loop
body. To keep the code readable, be sure to make the break obvious -- forgetting to
account for the action of a break is a traditional source of bugs in loop behavior.
while (
if (
break;
}
// control jumps down here on the break
14
The break does not work with if. It only works in loops and switches. Thinking that a
break refers to an if when it really refers to the enclosing while has created some high
quality bugs. When using a break, it's nice to write the enclosing loop to iterate in the
most straightforward, obvious, normal way, and then use the break to explicitly catch
the exceptional, weird cases.
Continue
The continue statement causes control to jump to the bottom of the loop, effectively
skipping over any code below the continue. As with break, this has a reputation as
being vulgar, so use it sparingly. You can almost always get the effect more clearly using
an if inside your loop.
while (
...
if (
continue;
...
...
// control jumps here on the continue
}
15
Section 3
Complex Data Types
C has the usual facilities for grouping things together to form composite types-- arrays
and records (which are called "structures"). The following definition declares a type
called "struct fraction" that has two integer sub fields named "numerator" and
"denominator". If you forget the semicolon it tends to produce a syntax error in whatever
thing follows the struct declaration.
struct fraction {
int numerator;
int denominator;
}; // Don't forget the semicolon!
This declaration introduces the type struct fraction (both words are required) as a
new type. C uses the period (.) to access the fields in a record. You can copy two records
of the same type using a single assignment statement, however == does not work on
structs.
struct fraction f1, f2; // declare two fractions
f1.numerator = 22;
f1.denominator = 7;
f2 = f1; // this copies over the whole struct
Arrays
The simplest type of array in C is one which is declared and used in one place. There are
more complex uses of arrays which I will address later along with pointers. The following
declares an array called scores to hold 100 integers and sets the first and last elements.
C arrays are always indexed from 0. So the first int in scores array is scores[0]
and the last is scores[99].
int scores[100];
scores[0] = 13; // set first element
scores[99] = 42; // set last element
16
0
scores
Index 1 2 99
13
Someone else’s memory
off either end of the
array — do not read or
write this memory.
There is space for
each int element in
the scores array —
this element is
referred to as
scores[0].
-5673 22541 42
These elements
have random
values because the
code has not yet
initialized them to
anything.
The name of the array refers to the
whole array. (implementation) it
works by representing a pointer to the
start of the array.
It's a very common error to try to refer to non-existent scores[100] element. C does
not do any run time or compile time bounds checking in arrays. At run time the code will
just access or mangle whatever memory it happens to hit and crash or misbehave in some
unpredictable way thereafter. "Professional programmer's language." The convention of
numbering things 0..(number of things - 1) pervades the language. To best
integrate with C and other C programmers, you should use that sort of numbering in your
own data structures as well.
Multidimensional Arrays
The following declares a two-dimensional 10 by 10 array of integers and sets the first and
last elements to be 13.
int board [10][10];
board[0][0] = 13;
board[9][9] = 13;
The implementation of the array stores all the elements in a single contiguous block of
memory. The other possible implementation would be a combination of several distinct
one dimensional arrays -- that's not how C does it. In memory, the array is arranged with
the elements of the rightmost index next to each other. In other words, board[1][8]
comes right before board[1][9] in memory.
(highly optional efficiency point) It's typically efficient to access memory which is near
other recently accessed memory. This means that the most efficient way to read through a
chunk of the array is to vary the rightmost index the most frequently since that will access
elements that are near each other in memory.
17
Array of Structs
The following declares an array named "numbers" which holds 1000 struct
fraction's.
struct fraction numbers[1000];
numbers[0].numerator = 22; /* set the 0th struct fraction */
numbers[0].denominator = 7;
Here's a general trick for unraveling C variable declarations: look at the right hand side
and imagine that it is an expression. The type of that expression is the left hand side. For
the above declarations, an expression which looks like the right hand side
(numbers[1000], or really anything of the form numbers[...]) will be the type
on the left hand side (struct fraction).
Pointers
A pointer is a value which represents a reference to another value sometimes known as
the pointer's "pointee". Hopefully you have learned about pointers somewhere else, since
the preceding sentence is probably inadequate explanation. This discussion will
concentrate on the syntax of pointers in C -- for a much more complete discussion of
pointers and their use see http://cslibrary.stanford.edu/102/, Pointers and Memory.
Syntax
Syntactically C uses the asterisk or "star" (*) to indicate a pointer. C defines pointer types
based on the type pointee. A char* is type of pointer which refers to a single char. a
struct fraction* is type of pointer which refers to a struct fraction.
int* intPtr; // declare an integer pointer variable intPtr
char* charPtr; // declares a character pointer --
// a very common type of pointer
// Declare two struct fraction pointers
// (when declaring multiple variables on one line, the *
// should go on the right with the variable)
struct fraction *f1, *f2;
The Floating "*"
In the syntax, the star is allowed to be anywhere between the base type and the variable
name. Programmer's have their own conventions-- I generally stick the * on the left with
the type. So the above declaration of intPtr could be written equivalently...
int *intPtr; // these are all the same
int * intPtr;
int* intPtr;
Pointer Dereferencing
We'll see shortly how a pointer is set to point to something -- for now just assume the
pointer points to memory of the appropriate type. In an expression, the unary * to the left
of a pointer dereferences it to retrieve the value it points to. The following drawing shows
the types involved with a single pointer pointing to a struct fraction.
18
struct fraction* f1;
f1
7
22
denominator
numerator
struct fraction*
struct fraction
(the whole
block of
memory)
int
(within
block of
memory)
Expression Type
f1 struct fraction*
*f1 struct fraction
(*f1).numerator int
There's an alternate, more readable syntax available for dereferencing a pointer to a
struct. A "->" at the right of the pointer can access any of the fields in the struct. So the
reference to the numerator field could be written f1->numerator.
Here are some more complex declarations...
struct fraction** fp; // a pointer to a pointer to a struct fraction
struct fraction fract_array[20]; // an array of 20 struct fractions
struct fraction* fract_ptr_array[20]; // an array of 20 pointers to
// struct fractions
One nice thing about the C type syntax is that it avoids the circular definition problems
which come up when a pointer structure needs to refer to itself. The following definition
defines a node in a linked list. Note that no preparatory declaration of the node pointer
type is necessary.
struct node {
int data;
struct node* next;
};
The & Operator
The & operator is one of the ways that pointers are set to point to things. The & operator
computes a pointer to the argument to its right. The argument can be any variable which
takes up space in the stack or heap (known as an "LValue" technically). So &i and
&(f1->numerator) are ok, but &6 is not. Use & when you have some memory, and
you want a pointer to that memory.
19
void foo() {
int* p; // p is a pointer to an integer
int i; // i is an integer
p = &i; // Set p to point to i
*p = 13; // Change what p points to -- in this case i -- to 13
// At this point i is 13. So is *p. In fact *p is i.
}
p
i 13
When using a pointer to an object created with &, it is important to only use the pointer so
long as the object exists. A local variable exists only as long as the function where it is
declared is still executing (we'll see functions shortly). In the above example, i exists
only as long as foo() is executing. Therefore any pointers which were initialized with
&i are valid only as long as foo() is executing. This "lifetime" constraint of local
memory is standard in many languages, and is something you need to take into account
when using the & operator.
NULL
A pointer can be assigned the value 0 to explicitly represent that it does not currently
have a pointee. Having a standard representation for "no current pointee" turns out to be
very handy when using pointers. The constant NULL is defined to be 0 and is typically
used when setting a pointer to NULL. Since it is just 0, a NULL pointer will behave like
a boolean false when used in a boolean context. Dereferencing a NULL pointer is an error
which, if you are lucky, the computer will detect at runtime -- whether the computer
detects this depends on the operating system.
Pitfall -- Uninitialized Pointers
When using pointers, there are two entities to keep track of. The pointer and the memory
it is pointing to, sometimes called the "pointee". There are three things which must be
done for a pointer/pointee relationship to work...
(1) The pointer must be declared and allocated
(2) The pointee must be declared and allocated
(3) The pointer (1) must be initialized so that it points to the pointee (2)
The most common pointer related error of all time is the following: Declare and allocate
the pointer (step 1). Forget step 2 and/or 3. Start using the pointer as if it has been setup
to point to something. Code with this error frequently compiles fine, but the runtime
results are disastrous. Unfortunately the pointer does not point anywhere good unless (2)
and (3) are done, so the run time dereference operations on the pointer with * will misuse
and trample memory leading to a random crash at some point.
20
{
int* p;
*p = 13; // NO NO NO p does not point to an int yet
// this just overwrites a random area in memory
}
-14346
p
i
Of course your code won't be so trivial, but the bug has the same basic form: declare a
pointer, but forget to set it up to point to a particular pointee.
Using Pointers
Declaring a pointer allocates space for the pointer itself, but it does not allocate space
for the pointee. The pointer must be set to point to something before you can dereference
it.
Here's some code which doesn't do anything useful, but which does demonstrate (1) (2)
(3) for pointer use correctly...
int* p; // (1) allocate the pointer
int i; // (2) allocate pointee
struct fraction f1; // (2) allocate pointee
p = &i; // (3) setup p to point to i
*p = 42; // ok to use p since it's setup
p = &(f1.numerator); // (3) setup p to point to a different int
*p = 22;
p = &(f1.denominator); // (3)
*p = 7;
So far we have just used the & operator to create pointers to simple variables such as i.
Later, we'll see other ways of getting pointers with arrays and other techniques.
C Strings
C has minimal support of character strings. For the most part, strings operate as ordinary
arrays of characters. Their maintenance is up to the programmer using the standard
facilities available for arrays and pointers. C does include a standard library of functions
which perform common string operations, but the programmer is responsible for the
managing the string memory and calling the right functions. Unfortunately computations
involving strings are very common, so becoming a good C programmer often requires
becoming adept at writing code which manages strings which means managing pointers
and arrays.
21
A C string is just an array of char with the one additional convention that a "null"
character ('\0') is stored after the last real character in the array to mark the end of the
string. The compiler represents string constants in the source code such as "binky" as
arrays which follow this convention. The string library functions (see the appendix for a
partial list) operate on strings stored in this way. The most useful library function is
strcpy(char dest[], const char source[]); which copies the bytes of
one string over to another. The order of the arguments to strcpy() mimics the arguments
in of '=' -- the right is assigned to the left. Another useful string function is
strlen(const char string[]); which returns the number of characters in C
string not counting the trailing '\0'.
Note that the regular assignment operator (=) does not do string copying which is why
strcpy() is necessary. See Section 6, Advanced Pointers and Arrays, for more detail on
how arrays and pointers work.
The following code allocates a 10 char array and uses strcpy() to copy the bytes of the
string constant "binky" into that local array.
{
char localString[10];
strcpy(localString, "binky");
}
b i n k y 0 x x x x
0 1 2 ...
localString
The memory drawing shows the local variable localString with the string "binky"
copied into it. The letters take up the first 5 characters and the '\0' char marks the end of
the string after the 'y'. The x's represent characters which have not been set to any
particular value.
If the code instead tried to store the string "I enjoy languages which have good string
support" into localString, the code would just crash at run time since the 10 character
array can contain at most a 9 character string. The large string will be written passed the
right hand side of localString, overwriting whatever was stored there.
String Code Example
Here's a moderately complex for loop which reverses a string stored in a local array. It
demonstrates calling the standard library functions strcpy() and strlen() and demonstrates
that a string really is just an array of characters with a '\0' to mark the effective end of the
string. Test your C knowledge of arrays and for loops by making a drawing of the
memory for this code and tracing through its execution to see how it works.
22
{
char string[1000]; // string is a local 1000 char array
int len;
strcpy(string, "binky");
len = strlen(string);
/*
Reverse the chars in the string:
i starts at the beginning and goes up
j starts at the end and goes down
i/j exchange their chars as they go until they meet
*/
int i, j;
char temp;
for (i = 0, j = len - 1; i < j; i++, j--) {
temp = string[i];
string[i] = string[j];
string[j] = temp;
}
// at this point the local string should be "yknib"
}
"Large Enough" Strings
The convention with C strings is that the owner of the string is responsible for allocating
array space which is "large enough" to store whatever the string will need to store. Most
routines do not check that size of the string memory they operate on, they just assume its
big enough and blast away. Many, many programs contain declarations like the
following...
{
char localString[1000];
...
}
The program works fine so long as the strings stored are 999 characters or shorter.
Someday when the program needs to store a string which is 1000 characters or longer,
then it crashes. Such array-not-quite-big-enough problems are a common source of bugs,
and are also the source of so called "buffer overflow" security problems. This scheme has
the additional disadvantage that most of the time when the array is storing short strings,
95% of the memory reserved is actually being wasted. A better solution allocates the
string dynamically in the heap, so it has just the right size.
To avoid buffer overflow attacks, production code should check the size of the data first,
to make sure it fits in the destination string. See the strlcpy() function in Appendix A.
char*
Because of the way C handles the types of arrays, the type of the variable
localString above is essentially char*. C programs very often manipulate strings
using variables of type char* which point to arrays of characters. Manipulating the
actual chars in a string requires code which manipulates the underlying array, or the use
23
of library functions such as strcpy() which manipulate the array for you. See Section 6 for
more detail on pointers and arrays.
TypeDef
A typedef statement introduces a shorthand name for a type. The syntax is...
typedef
The following defines Fraction type to be the type (struct fraction). C is case
sensitive, so fraction is different from Fraction. It's convenient to use typedef to
create types with upper case names and use the lower-case version of the same word as a
variable.
typedef struct fraction Fraction;
Fraction fraction; // Declare the variable "fraction" of type "Fraction"
// which is really just a synonym for "struct fraction".
The following typedef defines the name Tree as a standard pointer to a binary tree node
where each node contains some data and "smaller" and "larger" subtree pointers.
typedef struct treenode* Tree;
struct treenode {
int data;
Tree smaller, larger; // equivalently, this line could say
}; // "struct treenode *smaller, *larger"
24
Section 4
Functions
All languages have a construct to separate and package blocks of code. C uses the
"function" to package blocks of code. This article concentrates on the syntax and
peculiarities of C functions. The motivation and design for dividing a computation into
separate blocks is an entire discipline in its own.
A function has a name, a list of arguments which it takes when called, and the block of
code it executes when called. C functions are defined in a text file and the names of all
the functions in a C program are lumped together in a single, flat namespace. The special
function called "main" is where program execution begins. Some programmers like to
begin their function names with Upper case, using lower case for variables and
parameters, Here is a simple C function declaration. This declares a function named
Twice which takes a single int argument named num. The body of the function
computes the value which is twice the num argument and returns that value to the caller.
/*
Computes double of a number.
Works by tripling the number, and then subtracting to get back to double.
*/
static int Twice(int num) {
int result = num * 3;
result = result - num;
return(result);
}
Syntax
The keyword "static" defines that the function will only be available to callers in the
file where it is declared. If a function needs to be called from another file, the function
cannot be static and will require a prototype -- see prototypes below. The static form
is convenient for utility functions which will only be used in the file where they are
declared. Next , the "int" in the function above is the type of its return value. Next
comes name of the function and its list of parameters. When referring to a function by
name in documentation or other prose, it's a convention to keep the parenthesis () suffix,
so in this case I refer to the function as "Twice()". The parameters are listed with their
types and names, just like variables.
Inside the function, the parameter num and the local variable result are "local" to the
function -- they get their own memory and exist only so long as the function is executing.
This independence of "local" memory is a standard feature of most languages (See
CSLibrary/102 for the detailed discussion of local memory).
The "caller" code which calls Twice() looks like...
int num = 13;
int a = 1;
int b = 2;
a = Twice(a); // call Twice() passing the value of a
b = Twice(b + num); // call Twice() passing the value b+num
// a == 2
// b == 30
// num == 13 (this num is totally independent of the "num" local to Twice()
25
Things to notice...
(vocabulary) The expression passed to a function by its caller is called the "actual
parameter" -- such as "a" and "b + num" above. The parameter storage local to the
function is called the "formal parameter" such as the "num" in "static int Twice(int
num)".
Parameters are passed "by value" that means there is a single copying assignment
operation (=) from each actual parameter to set each formal parameter. The actual
parameter is evaluated in the caller's context, and then the value is copied into the
function's formal parameter just before the function begins executing. The alternative
parameter mechanism is "by reference" which C does not implement directly, but
which the programmer can implement manually when needed (see below). When a
parameter is a struct, it is copied.
The variables local to Twice(), num and result, only exist temporarily while
Twice() is executing. This is the standard definition for "local" storage for
functions.
The return at the end of Twice() computes the return value and exits the function.
Execution resumes with the caller. There can be multiple return statements within a
function, but it's good style to at least have one at the end if a return value needs to be
specified. Forgetting to account of a return somewhere in the middle of a function
is a traditional source of bugs.
C-ing and Nothingness -- void
void is a type formalized in ANSI C which means "nothing". To indicate that a function
does not return anything, use void as the return type. Also, by convention, a pointer
which does not point to any particular type is declared as void*. Sometimes void* is
used to force two bodies of code to not depend on each other where void* translates
roughly to "this points to something, but I'm not telling you (the client) the type of the
pointee exactly because you do not really need to know." If a function does not take any
parameters, its parameter list is empty, or it can contain the keyword void but that style
is now out of favor.
void TakesAnIntAndReturnsNothing(int anInt);
int TakesNothingAndReturnsAnInt();
int TakesNothingAndReturnsAnInt(void); // equivalent syntax for above
Call by Value vs. Call by Reference
C passes parameters "by value" which means that the actual parameter values are copied
into local storage. The caller and callee functions do not share any memory -- they each
have their own copy. This scheme is fine for many purposes, but it has two
disadvantages.
1) Because the callee has its own copy, modifications to that memory are not
communicated back to the caller. Therefore, value parameters do not allow the callee
to communicate back to the caller. The function's return value can communicate some
information back to the caller, but not all problems can be solved with the single
return value.
26
2) Sometimes it is undesirable to copy the value from the caller to the callee because the
value is large and so copying it is expensive, or because at a conceptual level copying
the value is undesirable.
The alternative is to pass the arguments "by reference". Instead of passing a copy of a
value from the caller to the callee, pass a pointer to the value. In this way there is only
one copy of the value at any time, and the caller and callee both access that one value
through pointers.
Some languages support reference parameters automatically. C does not do this -- the
programmer must implement reference parameters manually using the existing pointer
constructs in the language.
Swap Example
The classic example of wanting to modify the caller's memory is a swap() function
which exchanges two values. Because C uses call by value, the following version of
Swap will not work...
void Swap(int x, int y) { // NO does not work
int temp;
temp = x;
x = y; // these operations just change the local x,y,temp
y = temp; // -- nothing connects them back to the caller's a,b
}
// Some caller code which calls Swap()...
int a = 1;
int b = 2;
Swap(a, b);
Swap() does not affect the arguments a and b in the caller. The function above only
operates on the copies of a and b local to Swap() itself. This is a good example of how
"local" memory such as ( x, y, temp) behaves -- it exists independent of everything else
only while its owning function is running. When the owning function exits, its local
memory disappears.
Reference Parameter Technique
To pass an object X as a reference parameter, the programmer must pass a pointer to X
instead of X itself. The formal parameter will be a pointer to the value of interest. The
caller will need to use & or other operators to compute the correct pointer actual
parameter. The callee will need to dereference the pointer with * where appropriate to
access the value of interest. Here is an example of a correct Swap() function.
static void Swap(int* x, int* y) { // params are int* instead of int
int temp;
temp = *x; // use * to follow the pointer back to the caller's memory
*x = *y;
*y = temp;
}
27
// Some caller code which calls Swap()...
int a = 1;
int b = 2;
Swap(&a, &b);
Things to notice...
• The formal parameters are int* instead of int.
• The caller uses & to compute pointers to its local memory (a,b).
• The callee uses * to dereference the formal parameter pointers back to get the caller's
memory.
Since the operator & produces the address of a variable -- &a is a pointer to a. In
Swap() itself, the formal parameters are declared to be pointers, and the values of
interest (a,b) are accessed through them. There is no special relationship between the
names used for the actual and formal parameters. The function call matches up the actual
and formal parameters by their order -- the first actual parameter is assigned to the first
formal parameter, and so on. I deliberately used different names (a,b vs x,y) to emphasize
that the names do not matter.
const
The qualifier const can be added to the left of a variable or parameter type to declare that
the code using the variable will not change the variable. As a practical matter, use of
const is very sporadic in the C programming community. It does have one very handy
use, which is to clarify the role of a parameter in a function prototype...
void foo(const struct fraction* fract);
In the foo() prototype, the const declares that foo() does not intend to change the struct
fraction pointee which is passed to it. Since the fraction is passed by pointer, we could
not know otherwise if foo() intended to change our memory or not. Using the const,
foo() makes its intentions clear. Declaring this extra bit of information helps to clarify the
role of the function to its implementor and caller.
28
Bigger Pointer Example
The following code is a large example of using reference parameters. There are several
common features of C programs in this example...Reference parameters are used to allow
the functions Swap() and IncrementAndSwap() to affect the memory of their callers.
There's a tricky case inside of IncrementAndSwap() where it calls Swap() -- no additional
use of & is necessary in this case since the parameters x, y inside InrementAndSwap() are
already pointers to the values of interest. The names of the variables through the
program(a, b, x, y, alice, bob) do not need to match up in any particular way for the
parameters to work. The parameter mechanism only depends on the types of the
parameters and their order in the parameter list -- not their names. Finally this is an
example of what multiple functions look like in a file and how they are called from the
main() function.
static void Swap(int* a, int* b) {
int temp;
temp = *a;
*a = *b;
*b = temp;
}
static void IncrementAndSwap(int* x, int* y) {
(*x)++;
(*y)++;
Swap(x, y); // don't need & here since a and b are already
// int*'s.
}
int main()
{
int alice = 10;
int bob = 20;
Swap(&alice, &bob);
// at this point alice==20 and bob==10
IncrementAndSwap(&alice, &bob);
// at this point alice==11 and bob==21
return 0;
}
29
Section 5
Odds and Ends
main()
The execution of a C program begins with function named main(). All of the files and
libraries for the C program are compiled together to build a single program file. That file
must contain exactly one main() function which the operating system uses as the starting
point for the program. Main() returns an int which, by convention, is 0 if the program
completed successfully and non-zero if the program exited due to some error condition.
This is just a convention which makes sense in shell oriented environments such as Unix
or DOS.
Multiple Files
For a program of any size, it's convenient to separate the functions into several separate
files. To allow the functions in separate files to cooperate, and yet allow the compiler to
work on the files independently, C programs typically depend on two features...
Prototypes
A "prototype" for a function gives its name and arguments but not its body. In order for a
caller, in any file, to use a function, the caller must have seen the prototype for that
function. For example, here's what the prototypes would look like for Twice() and
Swap(). The function body is absent and there's a semicolon (;) to terminate the
prototype...
int Twice(int num);
void Swap(int* a, int* b);
In pre-ANSI C, the rules for prototypes where very sloppy -- callers were not required to
see prototypes before calling functions, and as a result it was possible to get in situations
where the compiler generated code which would crash horribly.
In ANSI C, I'll oversimplify a little to say that...
1) a function may be declared static in which case it can only be used in the same file
where it is used below the point of its declaration. Static functions do not require a
separate prototype so long as they are defined before or above where they are called
which saves some work.
2) A non-static function needs a prototype. When the compiler compiles a function
definition, it must have previously seen a prototype so that it can verify that the two
are in agreement ("prototype before definition" rule). The prototype must also be seen
by any client code which wants to call the function ("clients must see prototypes"
rule).(The require-prototypes behavior is actually somewhat of a compiler option, but
it's smart to leave it on.)
Preprocessor
The preprocessing step happens to the C source before it is fed to the compiler. The two
most common preprocessor directives are #define and #include...
30
#define
The #define directive can be used to set up symbolic replacements in the source. As with
all preprocessor operations, #define is extremely unintelligent -- it just does textual
replacement without understanding. #define statements are used as a crude way of
establishing symbolic constants.
#define MAX 100
#define SEVEN_WORDS that_symbol_expands_to_all_these_words
Later code can use the symbols MAX or SEVEN_WORDS which will be replaced by the
text to the right of each symbol in its #define.
#include
The "#include" directive brings in text from different files during compilation. #include is
a very unintelligent and unstructured -- it just pastes in the text from the given file and
continues compiling. The #include directive is used in the .h/.c file convention below
which is used to satisfy the various constraints necessary to get prototypes correct.
#include "foo.h" // refers to a "user" foo.h file --
// in the originating directory for the compile
#include
// in the compiler's directory somewhere
foo.h vs foo.c
The universally followed convention for C is that for a file named "foo.c" containing a
bunch of functions...
• A separate file named foo.h will contain the prototypes for the functions in foo.c
which clients may want to call. Functions in foo.c which are for "internal use
only" and should never be called by clients should be declared static.
• Near the top of foo.c will be the following line which ensures that the function
definitions in foo.c see the prototypes in foo.h which ensures the "prototype
before definition" rule above.
#include "foo.h" // show the contents of "foo.h"
// to the compiler at this point
• Any xxx.c file which wishes to call a function defined in foo.c must include the
following line to see the prototypes, ensuring the "clients must see prototypes" rule
above.
#include "foo.h"
31
#if
At compile time, there is some space of names defined by the #defines. The #if test can
be used at compile-time to look at those symbols and turn on and off which lines the
compiler uses. The following example depends on the value of the FOO #define symbol.
If it is true, then the "aaa" lines (whatever they are) are compiled, and the "bbb" lines are
ignored. If FOO were 0, then the reverse would be true.
#define FOO 1
...
#if FOO
aaa
aaa
#else
bbb
bbb
#endif
You can use #if 0 ...#endif to effectively comment out areas of code you don't
want to compile, but which you want to keeep in the source file.
Multiple #includes -- #pragma once
There's a problem sometimes where a .h file is #included into a file more than one time
resulting in compile errors. This can be a serious problem. Because of this, you want to
avoid #including .h files in other .h files if at all possible. On the other hand, #including
.h files in .c files is fine. If you are lucky, your compiler will support the #pragma once
feature which automatically prevents a single file from being #included more than once in
any one file. This largely solves multiple #include problems.
// foo.h
// The following line prevents problems in files which #include "foo.h"
#pragma once
Assert
Array out of bounds references are an extremely common form of C run-time error. You
can use the assert() function to sprinkle your code with your own bounds checks. A few
seconds putting in assert statements can save you hours of debugging.
Getting out all the bugs is the hardest and scariest part of writing a large piece of
software. Assert statements are one of the easiest and most effective helpers for that
difficult phase.
#include
#define MAX_INTS 100
{
int ints[MAX_INTS];
i = foo(
// but is it really?
assert(i>=0); // safety assertions
assert(i
ints[i] = 0;
32
Depending on the options specified at compile time, the assert() expressions will be left
in the code for testing, or may be ignored. For that reason, it is important to only put
expressions in assert() tests which do not need to be evaluated for the proper functioning
of the program...
int errCode = foo(); // yes
assert(errCode == 0);
assert(foo() == 0); // NO, foo() will not be called if
// the compiler removes the assert()
33
Section 6
Advanced Arrays and Pointers
Advanced C Arrays
In C, an array is formed by laying out all the elements contiguously in memory. The
square bracket syntax can be used to refer to the elements in the array. The array as a
whole is referred to by the address of the first element which is also known as the "base
address" of the whole array.
{
int array[6];
int sum = 0;
sum += array[0] + array[1]; // refer to elements using []
}
0 1 2 3 4 5
array
Index
array[0] array[1] array[2] ...
The array name acts like a pointer to the
first element- in this case an (int*).
The programmer can refer to elements in the array with the simple [ ] syntax such as
array[1]. This scheme works by combining the base address of the whole array with
the index to compute the base address of the desired element in the array. It just requires
a little arithmetic. Each element takes up a fixed number of bytes which is known at
compile-time. So the address of element n in the array using 0 based indexing will be at
an offset of (n * element_size) bytes from the base address of the whole array.
address of nth element = address_of_0th_element + (n * element_size_in_bytes)
The square bracket syntax [ ] deals with this address arithmetic for you, but it's useful to
know what it's doing. The [ ] takes the integer index, multiplies by the element size, adds
the resulting offset to the array base address, and finally dereferences the resulting pointer
to get to the desired element.
{
int intArray[6];
intArray[3] = 13;
}
34
0 1 2 3 4 5
intArray (intArray+3)
Index
Offset
in bytes =
n * elem_size
0 4 8 12 16 20
Assume sizeof(int) = 4i.e. Each array
element takes up 4 bytes.
13
12 bytes of offset
'+' Syntax
In a closely related piece of syntax, a + between a pointer and an integer does the same
offset computation, but leaves the result as a pointer. The square bracket syntax gives the
nth element while the + syntax gives a pointer to the nth element.
So the expression (intArray + 3) is a pointer to the integer intArray[3].
(intArray + 3) is of type (int*) while intArray[3] is of type int. The two
expressions only differ by whether the pointer is dereferenced or not. So the expression
(intArray + 3) is exactly equivalent to the expression (&(intArray[3])). In
fact those two probably compile to exactly the same code. They both represent a pointer
to the element at index 3.
Any [] expression can be written with the + syntax instead. We just need to add in the
pointer dereference. So intArray[3] is exactly equivalent to *(intArray + 3).
For most purposes, it's easiest and most readable to use the [] syntax. Every once in a
while the + is convenient if you needed a pointer to the element instead of the element
itself.
Pointer++ Style -- strcpy()
If p is a pointer to an element in an array, then (p+1) points to the next element in the
array. Code can exploit this using the construct p++ to step a pointer over the elements in
an array. It doesn't help readability any, so I can't recommend the technique, but you may
see it in code written by others.
(This example was originally inspired by Mike Cleron) There's a library function called
strcpy(char* destination, char* source) which copies the bytes of a C
string from one place to another. Below are four different implementations of strcpy()
written in order: from most verbose to most cryptic. In the first one, the normally
straightforward while loop is actually sortof tricky to ensure that the terminating null
character is copied over. The second removes that trickiness by moving assignment into
the test. The last two are cute (and they demonstrate using ++ on pointers), but not really
the sort of code you want to maintain. Among the four, I think strcpy2() is the best
stylistically. With a smart compiler, all four will compile to basically the same code with
the same efficiency.
35
// Unfortunately, a straight while or for loop won't work.
// The best we can do is use a while (1) with the test
// in the middle of the loop.
void strcpy1(char dest[], const char source[]) {
int i = 0;
while (1) {
dest[i] = source[i];
if (dest[i] == '\0') break; // we're done
i++;
}
}
// Move the assignment into the test
void strcpy2(char dest[], const char source[]) {
int i = 0;
while ((dest[i] = source[i]) != '\0') {
i++;
}
}
// Get rid of i and just move the pointers.
// Relies on the precedence of * and ++.
void strcpy3(char dest[], const char source[])
{
while ((*dest++ = *source++) != '\0') ;
}
// Rely on the fact that '\0' is equivalent to FALSE
void strcpy4(char dest[], const char source[])
{
while (*dest++ = *source++) ;
}
Pointer Type Effects
Both [ ] and + implicitly use the compile time type of the pointer to compute the
element_size which affects the offset arithmetic. When looking at code, it's easy to
assume that everything is in the units of bytes.
int *p;
p = p + 12; // at run-time, what does this add to p? 12?
The above code does not add the number 12 to the address in p-- that would increment p
by 12 bytes. The code above increments p by 12 ints. Each int probably takes 4 bytes, so
at run time the code will effectively increment the address in p by 48. The compiler
figures all this out based on the type of the pointer.
Using casts, the following code really does just add 12 to the address in the pointer p. It
works by telling the compiler that the pointer points to char instead of int. The size of
char is defined to be exactly 1 byte (or whatever the smallest addressable unit is on the
computer). In other words, sizeof(char) is always 1. We then cast the resulting
36
(char*) back to an (int*). The programmer is allowed to cast any pointer type to
any other pointer type like this to change the code the compiler generates.
p = (int*) ( ((char*)p) + 12);
Arrays and Pointers
One effect of the C array scheme is that the compiler does not distinguish meaningfully
between arrays and pointers-- they both just look like pointers. In the following example,
the value of intArray is a pointer to the first element in the array so it's an (int*).
The value of the variable intPtr is also (int*) and it is set to point to a single integer
i. So what's the difference between intArray and intPtr? Not much as far as the
compiler is concerned. They are both just (int*) pointers, and the compiler is perfectly
happy to apply the [] or + syntax to either. It's the programmer's responsibility to ensure
that the elements referred to by a [] or + operation really are there. Really its' just the
same old rule that C doesn't do any bounds checking. C thinks of the single integer i as
just a sort of degenerate array of size 1.
{
int intArray[6];
int *intPtr;
int i;
intPtr = &i;
intArray[3] = 13; // ok
intPtr[0] = 12; // odd, but ok. Changes i.
intPtr[3] = 13; // BAD! There is no integer reserved here!
}
37
0 1 2 3 4 5
intArray
i
intPtr
(intArray+3)
(intPtr+3)
These bytes exist, but they have not been explicitly reserved.
They are the bytes which happen to be adjacent to the
memory for i. They are probably being used to store
something already, such as a smashed looking smiley face.
The 13 just gets blindly written over the smiley face. This
error will only be apparent later when the program tries to
read the smiley face data.
Index
13
12 13
Array Names Are Const
One subtle distinction between an array and a pointer, is that the pointer which represents
the base address of an array cannot be changed in the code. The array base address
behaves like a const pointer. The constraint applies to the name of the array where it is
declared in the code-- the variable ints in the example below.
{
int ints[100]
int *p;
int i;
ints = NULL; // NO, cannot change the base addr ptr
ints = &i; // NO
ints = ints + 1; // NO
ints++; // NO
p = ints; // OK, p is a regular pointer which can be changed
// here it is getting a copy of the ints pointer
p++; // OK, p can still be changed (and ints cannot)
p = NULL; // OK
p = &i; // OK
foo(ints); // OK (possible foo definitions are below)
}
38
Array parameters are passed as pointers. The following two definitions of foo look
different, but to the compiler they mean exactly the same thing. It's preferable to use
whichever syntax is more accurate for readability. If the pointer coming in really is the
base address of a whole array, then use [ ].
void foo(int arrayParam[]) {
arrayParam = NULL; // Silly but valid. Just changes the local pointer
}
void foo(int *arrayParam) {
arrayParam = NULL; // ditto
}
Heap Memory
C gives programmers the standard sort of facilities to allocate and deallocate dynamic
heap memory. A word of warning: writing programs which manage their heap memory is
notoriously difficult. This partly explains the great popularity of languages such as Java
and Perl which handle heap management automatically. These languages take over a task
which has proven to be extremely difficult for the programmer. As a result Perl and Java
programs run a little more slowly, but they contain far fewer bugs. (For a detailed
discussion of heap memory see http://cslibrary.stanford.edu/102/, Pointers and Memory.)
C provides access to the heap features through library functions which any C code can
call. The prototypes for these functions are in the file
wants to call these must #include that header file. The three functions of interest are...
void* malloc(size_t size) Request a contiguous block of memory
of the given size in the heap. malloc() returns a pointer to the heap block or NULL if
the request could not be satisfied. The type size_t is essentially an unsigned
long which indicates how large a block the caller would like measured in bytes.
Because the block pointer returned by malloc() is a void* (i.e. it makes no claim
about the type of its pointee), a cast will probably be required when storing the void*
pointer into a regular typed pointer.
void free(void* block) The mirror image of malloc() -- free takes a
pointer to a heap block earlier allocated by malloc() and returns that block to the heap
for re-use. After the free(), the client should not access any part of the block or
assume that the block is valid memory. The block should not be freed a second time.
void* realloc(void* block, size_t size); Take an existing heap
block and try to relocate it to a heap block of the given size which may be larger or
smaller than the original size of the block. Returns a pointer to the new block, or
NULL if the relocation was unsuccessful. Remember to catch and examine the return
value of realloc() -- it is a common error to continue to use the old block pointer.
Realloc() takes care of moving the bytes from the old block to the new block.
Realloc() exists because it can be implemented using low-level features which make
it more efficient than C code the client could write.
Memory Management
All of a program's memory is deallocated automatically when the it exits, so a program
only needs to use free() during execution if it is important for the program to recycle its
memory while it runs -- typically because it uses a lot of memory or because it runs for a
39
long time. The pointer passed to free() must be exactly the pointer which was originally
returned by malloc() or realloc(), not just a pointer into somewhere within the heap block.
Dynamic Arrays
Since arrays are just contiguous areas of bytes, you can allocate your own arrays in the
heap using malloc(). The following code allocates two arrays of 1000 ints-- one in the
stack the usual "local" way, and one in the heap using malloc(). Other than the different
allocations, the two are syntactically similar in use.
{
int a[1000];
int *b;
b = (int*) malloc( sizeof(int) * 1000);
assert(b != NULL); // check that the allocation succeeded
a[123] = 13; // Just use good ol' [] to access elements
b[123] = 13; // in both arrays.
free(b);
}
Although both arrays can be accessed with [ ], the rules for their maintenance are very
different....
Advantages of being in the heap
• Size (in this case 1000) can be defined at run time. Not so for an array like "a".
• The array will exist until it is explicitly deallocated with a call to free().
• You can change the size of the array at will at run time using realloc(). The following
changes the size of the array to 2000. Realloc() takes care of copying over the old
elements.
...
b = realloc(b, sizeof(int) * 2000);
assert(b != NULL);
Disadvantages of being in the heap
• You have to remember to allocate the array, and you have to get it right.
• You have to remember to deallocate it exactly once when you are done with it, and you
have to get that right.
• The above two disadvantages have the same basic profile: if you get them wrong, your
code still looks right. It compiles fine. It even runs for small cases, but for some input
cases it just crashes unexpectedly because random memory is getting overwritten
somewhere like the smiley face. This sort of "random memory smasher" bug can be a
real ordeal to track down.
40
Dynamic Strings
The dynamic allocation of arrays works very well for allocating strings in the heap. The
advantage of heap allocating a string is that the heap block can be just big enough to store
the actual number of characters in the string. The common local variable technique such
as char string[1000]; allocates way too much space most of the time, wasting
the unused bytes, and yet fails if the string ever gets bigger than the variable's fixed size.
#include
/*
Takes a c string as input, and makes a copy of that string
in the heap. The caller takes over ownership of the new string
and is responsible for freeing it.
*/
char* MakeStringInHeap(const char* source) {
char* newString;
newString = (char*) malloc(strlen(source) + 1); // +1 for the '\0'
assert(newString != NULL);
strcpy(newString, source);
return(newString);
}
41
Section 7
Details and Library Functions
Precedence and Associativity
function-call() [] -> . L to R
! ~ ++ -- + - *(ptr deref) sizeof &(addr of) R to L
(all unary ops are the same)
* / % L to R
(the top tier arithmetic binary ops)
+ - L to R
(second tier arithmetic binary ops)
< <= > >= L to R
== != L to R
in order: & ^ | && || L to R
(note that bitwise comes before boolean)
= and all its variants R to L
, (comma) . L to R
A combinations which never works right without parens: *structptr.field
You have to write it as (*structptr).field or structptr->field
Standard Library Functions
Many basic housekeeping funcions are available to a C program in form of standard
library functions. To call these, a program must #include the appropriate .h file. Most
compilers link in the standard library code by default. The functions listed in the next
section are the most commonly used ones, but there are many more which are not listed
here.
stdio.h file input and output
ctype.h character tests
string.h string operations
math.h mathematical functions such as sin() and cos()
stdlib.h utility functions such as malloc() and rand()
assert.h the assert() debugging macro
stdarg.h support for functions with variable numbers of arguments
setjmp.h support for non-local flow control jumps
signal.h support for exceptional condition signals
time.h date and time
42
limits.h, float.h constants which define type range values such as INT_MAX
stdio.h
Stdio.h is a very common file to #include -- it includes functions to print and read strings
from files and to open and close files in the file system.
FILE* fopen(const char* fname, const char* mode);
Open a file named in the filesystem and return a FILE* for it. Mode = "r" read,"w"
write,"a"append, returns NULL on error. The standard files stdout, stdin,
stderr are automatically opened and closed for you by the system.
int fclose(FILE* file);
Close a previously opened file. Returns EOF on error. The operating system closes all
of a program's files when it exits, but it's tidy to do it beforehand. Also, there is
typically a limit to the number of files which a program may have open
simultaneously.
int fgetc(FILE* in);
Read and return the next unsigned char out of a file, or EOF if the file has been
exhausted. (detail) This and other file functions return ints instead of a chars because
the EOF constant they potentially is not a char, but is an int. getc() is an alternate,
faster version implemented as a macro which may evaluate the FILE* expression
more than once.
char* fgets(char* dest, int n, FILE* in)
Reads the next line of text into a string supplied by the caller. Reads at most n-1
characters from the file, stopping at the first '\n' character. In any case, the string is '\0'
terminated. The '\n' is included in the string. Returns NULL on EOF or error.
int fputc(int ch, FILE* out);
Write the char to the file as an unsigned char. Returns ch, or EOF on err. putc() is an
alternate, faster version implemented as a macro which may evaluate the FILE*
expression more than once.
int ungetc(int ch, FILE* in);
Push the most recent fgetc() char back onto the file. EOF may not be pushed back.
Returns ch or EOF on error.
int printf(const char* format_string, ...);
Prints a string with values possibly inserted into it to standard output. Takes a variable
number of arguments -- first a format string followed by a number of matching
arguments. The format string contains text mixed with % directives which mark
things to be inserted in the output. %d = int, %Ld=long int, %s=string, %f=double,
%c=char. Every % directive must have a matching argument of the correct type after
the format string. Returns the number of characters written, or negative on error. If
the percent directives do not match the number and type of arguments, printf() tends
to crash or otherwise do the wrong thing at run time. fprintf() is a variant which takes
an additional FILE* argument which specifies the file to print to. Examples...
printf("hello\n"); prints: hello
printf("hello %d there %d\n", 13, 1+1); prints: hello 13 there 2
printf("hello %c there %d %s\n", 'A', 42, "ok"); prints: hello A there 42 ok
43
int scanf(const char* format, ...)
Opposite of printf() -- reads characters from standard input trying to match elements
in the format string. Each percent directive in the format string must have a matching
pointer in the argument list which scanf() uses to store the values it finds. scanf()
skips whitespace as it tries to read in each percent directive. Returns the number of
percent directives processed successfully, or EOF on error. scanf() is famously
sensitive to programmer errors. If scanf() is called with anything but the correct
pointers after the format string, it tends to crash or otherwise do the wrong thing at
run time. sscanf() is a variant which takes an additional initial string from which it
does its reading. fscanf() is a variant which takes an additional initial FILE* from
which it does its reading. Example...
{
int num;
char s1[1000];
char s2[1000];
scanf("hello %d %s %s", &num, s1, s2);
}
Looks for the word "hello" followed by a number and two words (all separated by
whitespace). scanf() uses the pointers &num, s1, and s2 to store what it finds into the
local variables.
ctype.h
ctype.h includes macros for doing simple tests and operations on characters
isalpha(ch) // ch is an upper or lower case letter
islower(ch), isupper(ch) // same as above, but upper/lower specific
isspace(ch) // ch is a whitepace character such as tab, space, newline, etc.
isdigit(ch) // digit such as '0'..'9'
toupper(ch), tolower(ch) // Return the lower or upper case version of a
alphabetic character, otherwise pass it through unchanged.
44
string.h
None of these string routines allocate memory or check that the passed in memory is the
right size. The caller is responsible for making sure there is "enough" memory for the
operation. The type size_t is an unsigned integer wide enough for the computer's
address space -- most likely an unsigned long.
size_t strlen(const char* string);
Return the number of chars in a C string. EG strlen("abc")==3
char* strcpy(char* dest, const char* source);
Copy the characters from the source string to the destination string.
size_t strlcpy(char* dest, const char* source,
size_t dest_size);
Like strcpy(), but knows the size of the dest. Truncates if necessary. Use this to avoid
memory errors and buffer-overflow security problems. This function is not as
standard as strcpy(), but most sytems have it. Do not use the old strncpy() function --
it is difficult to use correctly.
char *strcat(char* dest, const char* source);
Append the characters from the source string to the end of destination string. (There is
a non-standard strlcat() variant that takes the size of the dest as third argument.)
int strcmp(const char* a, const char* b);
Compare two strings and return an int which encodes their ordering. zero:a==b,
negative:a
being boolean true if the strings are equal which is, unfortunately, exactly backwards.
char* strchr(const char* searchIn, char ch);
Search the given string for the first occurence of the given character. Returns a
pointer to the character, or NULL if none is found.
char* strstr(const char* searchIn, const char* searchFor);
Similar to strchr(), but searches for an entire string instead of a single character. The
search is case sensitive.
void* memcpy(void* dest, const void* source, size_t n);
Copy the given number of bytes from the source to the destination. The source and
destination must not overlap. This may be implemented in a specialized but highly
optimized way for a particular computer.
void* memmove(void* dest, const void* source, size_t n);
Similar to memcpy() but allows the areas to overlap. This probably runs slightly
slower than memcpy().
45
stdlib.h
int rand();
Returns a pseudo random integer in the range 0..RAND_MAX (limits.h) which is at
least 32767.
void srand(unsigned int seed);
The sequence of random numbers returned by rand() is initially controlled by a global
"seed" variable. srand() sets this seed which, by default, starts with the value 1. Pass
the expression time(NULL) (time.h) to set the seed to a value based on the current
time to ensure that the random sequence is different from one run to the next.
void* malloc(size_t size);
Allocate a heap block of the given size in bytes. Returns a pointer to the block or
NULL on failure. A cast may be required to store the void* pointer into a regular
typed pointer. [ed: see the Heap Allocation section above for the longer discussion of
malloc(), free(), and realloc()]
void free(void* block);
Opposite of malloc(). Returns a previous malloc block to the system for reuse
void* realloc(void* block, size_t size);
Resize an existing heap block to the new size. Takes care of copying bytes from the
old block to the new. Returns the new base address of the heap block. It is a common
error to forget to catch the return value from realloc(). Returns NULL if the resize
operation was not possible.
void exit(int status);
Halt and exit the program and pass a condition int back to the operating sytem. Pass 0
to signal normal program termination, non-zero otherwise.
void* bsearch(const void* key, const void* base, size_t len,
size_t elem_size,
Do a binary search in an array of elements. The last argument is a function which
takes pointers to the two elements to compare. Its prototype should be:
int compare(const void* a, const void* b);, and it should return 0, -1, or 1 as strcmp()
does. Returns a pointer to a found element, or NULL otherwise. Note that strcmp()
itself cannot be used directly as a compare function for bsearch() on an array of char*
strings because strcmp() takes char* arguments and bsearch() will need a comparator
that takes pointers to the array elements -- char**.
void qsort(void* base, size_t len, size_t elem_size,
Sort an array of elements. Takes a function pointer just like besearch().
stack.c
Arrary implementation w/ pointer arithmetic
#include “stack.h”
static int contents[100];
static int *top_ptr = contents;
…
void push(int i) {
if (is_full())
…
else
*top_ptr++ = i;
}
int pop() {
if (is_empty())
…
else
return *--top_ptr;
}
Thanks To
The most recent version is always maintained at its Stanford CS Education Library URL
http://cslibrary.stanford.edu/101/. Please send your comments to
nick.parlante@cs.stanford.edu.
I hope you can share and enjoy this document in the spirit of goodwill in which it is given
away -- Nick Parlante, 4/2003, Stanford California.
Stanford CS Education Library This is document #101, Essential C, in the Stanford
CS Education Library. This and other educational materials are available for free at
http://cslibrary.stanford.edu/. This article is free to be used, reproduced, excerpted,
retransmitted, or sold so long as this notice is clearly reproduced at its beginning.
